If you are a smart businessman who has interests in producing some bucks from the eco-friendly energy, than you should know about biomass pellets. What on earth is biomass pellets? Biomass pellets are a product you could make with different kinds of biomass raw materials, consisting of sawdust, bagasse, wheat straw, peanut shell, leaves and so forth. Those biomass raw materials is very common and obtainable worldwide. Unlike natural gas and fossil oil, those raw materials are not expensive and is eco-friendly. What is even more vital is that it won’t emit damaging greenhouse gas which will affect the environment of the earth. Its high burning efficiency is also one of its outstanding merit. Qualified pellets can attain a burning rate as large as 98% in the pellet boiler and pellet stove. Based on the facts mentioned above, it is not so difficult for you to understand why biomass pellets will become more and more popular around the world.
Besides biomass raw material, you need a pellet mill to help you do the pelletizing job. There are two patterns of pellet mill. One is flat die pellet mill, and the other is ring die pellet mill. Generally speaking, flat die pellet mill is suitable for small scale production and the other is often used for dealing with large scale biomass pellet production. There are two important factors you should remember prior to deciding to feeding the biomass raw material into the pellet mill. One is that you should pulverize the raw material into small particles with a hammer mill, much smaller than the hole of the pellet mill die. The next one is that the moisture content of the raw material should between 15-20%. Too high or too low is not suitable.
To produce high quality pellets, you mayconsider the pelletizing is the last step. But the truth is that there are still more jobs to be done. When the pellets emerge from the pellet mill, they are very hot and needed to cool down, otherwise they will easily crumble and all your earlier job is in vain. So in this step, you need a cooler to help you. After cooling, you need to pack them with a packing machine into bags or other container to keep it from eroding by the moisture. As you should know, the good quality pellet mill should be firm with a smooth surface.
In conclusion, an overall production line usually consists of mashing, drying, pelletizing,cooling, packing. But if you only has the plan to make biomass pellets for personal use, you may only need to have a small scale pellet mill. It will be very rewarded that you can warm up your house in the cold water with the biomass fuel you make by yourself. The raw material can be any kinds of agricultural wastes that you can get from your farm, which can recycle the natural resources. What’s more, after burning the biomass pellets, you can also feed other plants with the biomass pellet ash, that’s very beneficial for the growth of plants.
If you have interests regarding pellet mill, check out further at here.
Sponsored Links
Author: deborahhol
This author has published 1 articles so far. More info about the author is coming soon.